- Certification: CE,ISO9001,TUV,UL,BV,ETC.
- Use: Surface preparation/Smoothing/Decorative blasting/Peening/De-burring
- Port: QINGDAO/TIANJIN/SHANGHAI
|Max. diameter of work piece batch(mm)||700||1000||1200||1400||1600||1800||3000|
|max. height of work piece||1200||1600||2000||2200||2300||2500||3000|
|Max. weight of workpiece(kg)||600||800||1000||2000||3000||5000||10000|
|No. of wheelsx Power(kw)||2x 7.5||2x 11||2x 15||3x 15||3x 15||4x 15||5x 15|
DescriptionShot blasting of casts, welded constructions, forged and pressed parts, remodelled cold or hot and of various complicated forms, steel bottles, springs, etc. (weighing from 1 to 5.000 kg or more, manufactured in smaller and medium series), cleaning surface, removing casting sand and filings and consolidating the surface (microhandling), roughing the surface before colouring, etc.
Treated objects are hanged individually or in a cluster to the revolving hook and transported to the machine via I, Y conveyor. Revolving of treated objects in a jet of abrasive provides efficient treatment of less accessible parts of their surface. The machine’s housing is protected by wear-resistant manganese steel or entirely made of manganese steel and additional protection of the most exposed parts. High efficiency of the machine is provided by the system for continued returning and cleaning of the abrasive, along with efficient turbines made from wear-resistant materials. Standard equipment of larger machines includes: PLC Siemens, display, timer, automatic or manual mode, pneumatic cylinders on the door, revolving hooks, automatic start-up of turbines, working-hours counter, etc. Machines may be manufactured by order, with adjusted size, number and power of turbines, shape of the hanging conveyor, capacity and number of revolving hooks. The hook’s hoist and trolley drive may be manufactured in accordance with the buyer’s needs. The machine may be equipped with a magnetic separator, vibration conveyor and variable frequency drive for the turbines.
Blast cabinet★Welded by steel plates and profile steel, have enough strength and rigidity.
★ZGMn13 steel guard plate, which is hard enough to deal with the shot blasting from 35HRC to more than 55HRC.
★High impact toughness can make full use of the reflection kinetic energy of shot to continue to blast cleaning the surface of work piece, so greatly enhance the cleaning efficiency and quality.
★High chrome wear resistant cast iron grate guard plate which protect the screw conveyor and prevent big clump to get into the hopper damaging the bottom screw conveyor
Blast turbines★Cantilever centrifugal high efficiency blast wheel, can operate clockwise or counter-clockwise, optimum abrasive flow rate for faster cleaning.
★impeller adopted #40 Chrome wear resistant cast iron.
★High chrome wear resistant cast iron for blades, control cage, abrasive distributor.
★Dynamic and static balance.
★Blades of impeller weight tolerance≤±1.5g.
★Unbalanced torque tolerance≤±7.5Nmm.
★Direct drive blast wheel with special motor bearings means less spare parts, less noise, energy-efficient, large abrasive flow rate and good cleaning effect ,etc. advantages.
★Machined housing ensures proper alignment of all internal parts.
★Less part wear due to greater concentricity and more precise alignment.
★Safety interlock is fitted on the housing cover to protect the workers safety.
★Particular guard liner structure increase the abrasion resistant lifespan 60% to 200%.
Pneumatic Abrasive dosing units
★Abrasive flow is indicated at the ammeter at the electrical switch and control box.
★Adjusting the bolt on the abrasive control valve can conveniently adjust the abrasive flow rate to an required amount
★In order to be able to dismount the abrasive control unit from the silo for repair works and to avoid any abrasive outflow for each unit one manual slide is installed in front of the abrasive control unit.
Critical to achieving this efficiency is the effectiveness of the abrasive recycling plant. Poorly designed or manufactured abrasive recycling systems will not correctly recycle the abrasive and are unable to maintain the correct abrasive working mix.
Our patented abrasive separator consists of an extended rotary separator drum that will totally remove all big clumps including big wast, scrap and paint chips etc. The abrasive is then fed through a gravity air wash separator where all dust, degraded abrasive and waste is drawn out of hte good abrasive by an air current.
Only good, correctly sized abrasive is fed back to the abrasive storage hopper and blast pots for recycling.
Our patented abrasive cleaner ensures maximum recyling rates of the abrasive and high quality surface finishing is achieved.
Standard to Customs
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.