English 
français 
Deutsch 
Español 
italiano 
русский 
português 
العربية 
ไทย 
Polska 
română 
The tumble belt shot blasting machine is suitable for multi-variety, it can be finish Surface derusting and shot peening for mass production work pieces. The part must be cleaned without fear of collision, and castings and heat-treated which weighing less than 150 kg. The machine can be used not only as a single machine but also as a part of line. It belongs to the scope of foundry machinery. Automatic: Put the work piece into the rubber crawler roller, the operator clicks the "Run" button, the shot blasting chamber door is pneumatically closed, the shot blasting cleaning machine starts, the crawler runs forward, continuously rolls, and the high-efficiency steel shot passes through the slip on the crawler Hole screw conveyor, and then convey the steel shots to the bucket elevator, bolts and nuts shot blasting machine which is lifted to the separator by the bucket elevator, and is stored for use after being separated. After the shot blasting is completed, the door of the shot blasting chamber is automatically opened and the track is reversed, until the work piece is unloaded. Application range are include die-casting, precision casting and precision forging, etc.They can remove oxide scale on heat treated parts, castings, forgings, strengthening of the spring , descaling and pre-treatment of fasteners.
With 100+ workers in the sandblasting machine factory, 22 engineers, and a service team of 10, QINGGONG MACHINERY have the capability to meet your requests of shot blasting and sand blasting machines. Welcome to contact us.
