How to extend the service life of automatic wheel shot blasting machine

When the automatic wheel shot blasting machine performs the shot blasting work, it is difficult to avoid certain damage to the equipment itself. If the daily maintenance is not done, it will directly affect the service life of the automatic wheel shot blasting machine. Based on years of experience in the production of shot blasting machines, the following methods for prolonging the service life of fully automatic wheel shot blasting machines are summarized:

1. Daily maintenance and maintenance of the automatic wheel shot blasting machine: (1) Whether the fixing bolts of all shot blasters and shot blasting motors are loose; (2) Whether the inspection door of the shot blasting room is tight; (3) How is the brush wear? (4) When spinner hanger shot blasting machine is shut down, whether the pill-receiving tube and rolling brush reach the highest position; (5) Whether the air ducts are intact and whether there is leakage; (6) Clean up the deposits on the pellet filter; (7) Each screw All the shots should be lifted into the shot bin, whether the total amount of shots is sufficient (should be greater than 1 ton); (8) Clean the air filter in the air control box.

2. Monthly maintenance and maintenance of the automatic wheel shot blasting machine: (1) Check whether all transmission parts are running normally, and lubricate the chain; (2) Adjust the synchronization of the chain operation of the entire system; (3) Check the air duct of the fan (4) Check and adjust the fixed position of the shot blasting device; (5) Check the firmness of the bolts of the painting trolley, spray gun, and height adjustment device in the painting room; (6) Clean the paint on the rolling surface of the spraying trolley guide mechanism (7) Check all the connecting bolts of the upper and lower drag chains and tighten them. At the same time check the paint, air hose, and cable; (8) Check the insulation of the main grounding plate, if it exceeds the allowable value (4 Ω), it must be dealt with in time.

3. Seasonal maintenance and maintenance of the automatic wheel shot blasting machine: (1) Check the integrity of all bearings and pumps; (2) Check the wear of the wear-resistant lining of the shot blasting machine. Check all motors, sprockets, and fans. The tightness of the fixing bolts and flange connections; (3) Check the guide fork bearings of the painting trolley, the bearings of the shot blaster, and the bearings of the painting trolley and replace with new grease.

4. Annual repair and maintenance of the automatic wheel shot blasting machine: (1) Check the grease injection of all bearings and add new grease; (2) Check and repair the high-pressure jet pump; (3) Check and repair the dust collector device; (4) Check and repair all motor bearings.

As a blast machine supplier, with 100+ workers, 22 engineers, and a service team of 10, QINGGONG machinery has the capability to meet your requests of shot blasting and sandblasting machines. Welcome to contact us.