English 
français 
Deutsch 
Español 
italiano 
русский 
português 
العربية 
ไทย 
Polska 
română 
In many of the steel industry always in need of the shot blasting machine to clean the steel surface. How to choose a suitable machine for your steel work-piece?
The most important to choose a suitable machine depends on your work-pieces size and the required level of performance, we will develop the customized for you. To blast the steel H beam we recommend the roller conveyor shot blasting machine.
The roller conveyor blast machine is used to remove rust and scale from the H beam surface. Before the H beam enters into the chamber, the red sensor will be activated and then the automatically releases abrasive to the blast turbine.
This can make sure the abrasive can blasting the H beam only in the blasting zone. The inlet of the blast chamber is equipped with wear-resistant rubber curtains, which can prevent the abrasive spill out. On the bottom of the inlet chamber is sealed by an adjustable scraper brush. After shot blasting, it also has the nylon rotating brush and high pressure blowing to clean the remaining abrasive on the H beam surface. The remaining abrasive will return to the recycle system to re-use. The recycle system will feed the cleaned abrasive from the storage silo to the high performance turbines.
