How to avoid daily problems with the roller conveyor through type shot blasting machine

Qinggong Machinery roller conveyor through type shot blasting machine generally uses steel grit or steel shot for shot blasting to remove rust and impurities on the surface of metal workpieces to restore the original color of the workpiece and prevent the workpiece from deteriorating. The separator separates the cleaned workpiece from the cleaned impurities and sends the cleaned workpiece out of the equipment. Qinggong Machienry has compiled some things for everyone to avoid daily problems in order to extend the service life of the equipment.

1. Check the high manganese steel protective plate, wear-resistant rubber plate and other protective plates of the roller through shot blasting machine. If worn or broken, it should be replaced immediately to prevent steel shots from penetrating the walls of the blasting chamber and flying out of the chamber to injure people. When it is necessary to enter the inspection room, the main power supply of the equipment must be cut off and an indicator sign must be hung up.

2. Check the tightness of the progress of the machine, the tightness should be tightened in time to prevent the outbreak of failure;

3. Check the vibration of the shot blasting machine. Once the machine is found to have excessive vibration, stop the machine immediately, check the wear of the wear parts of the shot blasting machine and the focus of the impeller, and replace the damaged parts. Before opening the end cover of the shot blasting machine, the main power supply of the cleaning equipment should be cut off. If the rolling of the shot blasting machine does not stop completely, the initial cover must not be turned over.

4. Regularly stabilize all motors and bearings on the equipment.

5. Regular supply of new steel shot. Due to the wear and damage of the steel shots during use, a certain number of new steel shots need to be replenished regularly. Especially when the quality of the workpiece to be cleaned does not meet the standard, the small number of projectiles may be an important reason.

Compared with other types of shot blasting machines, Qinggong Machinery roller conveyor through type shot blasting machine is more efficient. This is because the roller conveyor through type shot blasting machine was originally designed to increase the speed of shot blasting machine process. In order to achieve this requirement, the roller conveyor through type shot blasting machine will be equipped with different accessories according to the customer's needs during assembly. At the same time, in order to increase the service life of the shot blasting machine, all its raw materials are made of materials with high wear resistance and strength.

Through daily maintenance the roller conveyor through type shot blasting machine working efficiency of the equipment can be greatly improved and the service life of the equipment can be extended.

For Qinggong Machinery, selling equipment to customer is not our ultimate goal. Making customer satisfied with the machine and bring profits to customer is our pursuit.